RuneAudio+R e6

[s.k.]

[Russ]

[R101]

[s.k.]

Update 20201201
• Rune logo in ssh isn’t displayed correctly


• Doesn’t shows the fourth kernel load in Status

This “Voltage under 4.7V” does not appeared in my “prototype” SD image, but it appears on any clone made from it.
I haven’t notice any audible malfunction because of it.

• Disk capacity is missing (was on top in Addons page)
• A disk expansion addon would be nice

[Alien8]

Most of not all issues are now fixed.

My lcd still won't work with this. After much search I managed to get some characters on the display but nothing meaningful...
As mentioned earlier I have only gpio mode with different pinout.

One issue is but even with that I have no succes.

My pinout is definitely different, rs =8, en =7, r/w =None, d4-d8 =25,24,23,27.
Lcdchar claims only 26 pins support.

With GPIO.BCM I could assign pins directly and as said get a few characters but alas no useful display.

My (heavily modded) dockerized pydPiper script works fine though.(switching back and forth to debug)

A8

[rern]

[R101]

@rern,

After unplugging the USB DAC and reconnecting it, I have to remount my USB memory stick and do a rescan.

[KarelB]

[kolmberger]

Thanks a lot to the developers for doing such a great work.

May I post my latest issue here? On a 3b+ I cannot get audio via Bluetooth on a speaker running. Pairing with the speaker succeeded, but no sound.
I might have wrong settings in MPD and / or System settings.

Can someone help me on configuring bluetooth output?

Thanks and cheers.

[rern]